Financial Options Available 

Fixed Single-arm Basketball Hoop & Backboard

Triplestar Model 232 - Basketball Hoop & Backboard Range

Product Structure and Material Specification

Extension arm of the backboard is 2.25m in length. The upper edge rim is 3.05m above the ground. The posts is made with custom tailored 180 x180 x4 high quality square tube with big round corner (R40mm).

The fixed orifices on pull rod of extension arm are all impact moulded and then welded inside with non-standard nuts. The flange of the post and frontal parts and base board of extension arm are all made with high quality cast steel. All material used is of a high-quality standard.


This product, the only designated product by CBA, has been certified by FIBA and passed the ISO 9001 International Quality System Authentication and ISO 14001 Environment System Authentication.
It has been certified by National Sport Goods Quality Supervision Inspection Centre, and has been insured by People’s Insurance Company of China against quality.

Principle of Product Structure

Special iron ground sleeves are adopted in this product. The ground sleeves shall be embedded advance prior to installation of the backboard. The whole installation can only be started after the maintenance period.

Flanges are used to connect the backboard and ground sleeves. The flange is precision casted with big round angle around it. Its specification is 350 x 350mm.


Specification: 1800 x 1050 x 30(mm). The backboard is the internationally used high-tension safety glass backboard, which features high transparency, excellent weather resistance, aging resistance, corrosion resistance, not easily blurred, etc. Lower edge of the backboard is covered with a guard ring for player protection.

Basketball Ring

The ring is made with 17 solid circular steel. Bottom of the ring is welded with 12 impact-molded circular arc net hooks, which are distributed evenly along the ring in certain clearance and used to hang the basketball net. The ring has good flexible resistance, fastened onto the backboard horizontally.


All fasteners used for basketball backboard are ‘Jin Millon’ screws, an international famous brand. The surface of which are galvanized to guarantee no rust all year round.

Surface Treatment

  • Surface of all steel parts are treated by means of acid washing and sprayed with pure polyester powder as surface finish.
  • Has passed a pencil hardness test with result of 3H+.
  • The coating is free from any toxic material, so it will not harm the users’ health.


Stay Connected

Contact Us

Send us a message and we will get back to you as soon as possible.

Location Map