Electro-hydraulic Basketball Hoop & Backboard
Triplestar Model 101 - Basketball Hoop & Backboard Range
Extension arm of the backboard is 3.35m in length.
Upper edge of the rim is 3.05m above the ground.
The dimension of the base: length x width x front x height= 2.5 x 1.3 x 0.74 x 0.385 (m).
This product is in accordance with technical requirements of International Basketball Federation (FIBA) and is suitable for a court 37.4m in circumference.
Base of the backboard is made from 6mm-thick iron plates. Support for the front post of the base is made with 12# channel steel, while the support for the rear post and oil cylinder are made with 14#channel steel.
In this basketball backboard , reasonable structural design and unique appearance are perfectly combined together.
Principle of Product Structure
This electro-hydraulic basketball backboard adopts a microcomputer control system, includes a backstop lifting system, travelling wheel retractable mechanism, electrical system and hydraulic system.
Four-link mechanism is adopted for lifting of the main body of the basketball backboard .
Use power adapter with different electrical currencies available, to start the motor, the motor will drive the oil pump and ultimately you can activate the functional movement of the post.
Specification: 1800 x 1050(mm).
The backboard is a five- fulcrum backboard, using high-tension safety glass (13mm- thick double-laminated glass).
High transparency, excellent weather resistance, aging resistance, corrosion resistance, not easily blurred.
The lower edge of backboard covered with guard ring for player protection.
Front post, base and extension arm of the basketball backboard are all equipped with protective padding to protect players from impact.
Anti-vibration pad is installed at bottom of the base, while bob-weights (500kg each) are installed on the tail of the base.
Client approved logo’s can be applied to backboard padding.
Steel parts treated with acid washing and then sprayed with static epoxy powder. Has passed a pencil hardness test with result of 3H+, and is free of toxic material on all coatings.
Ring is made with #19 solid round steel with excellent flexing resistance. When the load is under 105kg the ring will not move, although if greater than 105kg the ring will move downwards up to 30dgrees.